SICK ICR890 Instrucciones de operaciones descargar pdf (Pagina 8)

Chapter 2 Online Help

ICR890

Image capture properties Use the parameters of the Image capture properties group to set the parameters for image

recording.

Parameters Function

Left edge of conveyor Enter maximum distance in Y direction to the reference point.

If applicable, select unit.

Right edge of conveyor Enter minimum distance in Y direction to the reference point.

If applicable, select unit.

Maximum scanning height Enter maximum object height (distance in Z direction to the refer-

ence point).

If applicable, select unit.

Level of conveyor Enter the height of the conveyor level to the reference point.

If applicable, select unit.

Parameters Function

Digital zoom Activate/Deactivate whether the image is to be recorded dis-

tance-independently with square resolution.

Zoom hysteresis Enter threshold for digital zoom switching.

If applicable, select unit.

Dynamic scanfrequency Activate/Deactivate automatic adjustment of the scanfrequency

to the conveyor speed.

Skew dependent gain adaption Activate/Deactivate adjustment of the image brightness to the

skew angle (only when reading from the side).

Gain adjustment factor Enter the static brightness.

Image resolution Adjust the image resolution to the maximum codelabel distance.

The image resolution depends on the focal length of the lens (e.g.

135 mm):

Codelabel distance 2 m: 250 dpi

Codelabel distance 2.5 m: 200 dpi

Codelabel distance 3 m: 170 dpi

CCD-line mirroring Reverse the reading direction of the CCD by 180°.

Depending on the installation situation it is necessary to guaran-

tee correct image capture.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

Sin comentarios

SICK ICR890 Instrucciones de operaciones Pagina 8