SICK ICR890 Instrucciones de operaciones descargar pdf (Pagina 12)

Chapter 2 Online Help

ICR890

2.1.1.2.1Limits

Focus control limits Use the parameters of the Focus control limits group to activate/deactivate the focus con-

trol limits deviating from the reading area.

Limits referred to

conveyor belt

Use the parameters of the Limits referred to conveyor belt group to assign the focus control

limits deviating from the reading area.

2.1.1.2.2MLG Settings

General Use the parameters of the General group to configure, amongst other things, the position

and the properties of the external distance measurement.

2.1.1.3 Illumination Control

Illumination mode Use the parameters of the Illumination mode group to define the conditions for illumination

control.

Parameters Function

Limits referred to conveyor belt Activate/Deactivate relative focus control limits.

Parameters Function

Right edge of conveyor Enter minimum distance in Y direction to the reference point.

If applicable, select unit.

Left edge of conveyor Enter maximum distance in Y direction to the reference point.

If applicable, select unit.

Level of conveyor Enter the height of the conveyor level to the reference point.

If applicable, select unit.

Maximum scanning height Enter maximum height (distance in Z direction to the reference

point).

If applicable, select unit.

Parameters Function

Distance between beams Enter distance between the beams of the MLG.

Number of beams Enter number of beams of the MLG.

X-position of MLG Enter distance of MLG to the reference point in X direction (con-

veyor direction).

Z-position of MLG Enter height of the first MLG light beam to the reference point in Z

direction (height).

Parameters Function

Lamp on Select condition for switching on the illumination.

Lamp off Select condition for switching off the illumination.

Lamp timeout active Activate/Deactivate automatic illumination switch-off.

Timeout Enter the time after which the illumination is automatically

switched off.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Sin comentarios

SICK ICR890 Instrucciones de operaciones Pagina 12