SICK ICR890 Instrucciones de operaciones descargar pdf (Pagina 10)

Chapter 2 Online Help

ICR890

2.1.1.2 Focus Control

Options Use the parameters of the Options group to define the Focus Control Mode.

The focus position can be permanently set, dynamic or controlled via distance measure-

ment by an external sensor.

Depth of field

optimization

Use the parameters of the Depth of field optimization group to define a distance-dependent

offset of the focus position.

Distance measurement

source

Use the parameters of the Distance measurement source group to assign the external sen-

sor for the distance measurement.

The focus position can be controlled via the distance measurement.

Parameters Function

Default position Enter a default value for the position.

If applicable, select unit.

This value is used for "Fixed Focus".

Focus control mode Select the type of focus control.

Focus ramp active Constant adjustment of the digital zoom depends on whether the

reading distance has been activated/deactivated.

Parameters Function

Offset at minimum Enter the offset of the focus position (for a reading distance of

1000 mm).

If applicable, select unit.

Offset at maximum Enter the offset of the focus position (for a codelabel distance of

3000 mm).

If applicable, select unit.

Parameters Function

MLG Activate/Deactivate MLG for the distance measurement.

from Select link to MLG.

from Enter CAN address of MLG.

VMS Activate/Deactivate VMS for the distance measurement.

from Select link to VMS.

from Enter CAN address of VMS.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Sin comentarios

SICK ICR890 Instrucciones de operaciones Pagina 10