SICK ICR890 Instrucciones de operaciones descargar pdf (Pagina 36)

Chapter 2 Online Help

ICR890

2.1.8.3.1GBit FTP

GBit FTP client Use the parameters of the GBit FTP client group to configure the FTP settings.

2.1.8.4 CAN

CAN 1 Use the parameters of the CAN 1 group to configure the CAN 1 data interface.

CAN 2 Use the parameters of the CAN 2 group to configure the CAN 2 data interface.

Parameters Function

Enable Activate/Deactivate the FTP for GBit Ethernet.

Server address Enter IP address of the FTP server (receiver).

Host name Enter host name of the FTP server (receiver).

The host name can be added to the upload path.

Username Enter FTP user name

The user name has to be agreed with the receiver.

Password Enter password for FTP access.

The password has to be agreed with the receiver.

Upload path Enter path for file storage at the FTP server.

Device specific upload path Select whether the serial number or the host name is added to

the upload path.

IP port Indicates IP port for FTP.

Parameters Function

Mode Select the type of CAN network.

Use device ID as node ID The device ID of the device is used as the node ID in the CAN net-

work.

Assignment of the device ID: see chapter 2.1.8 Network / Inter-

faces / IOs, page 33

Device ID Enter the node ID of the scanner in the CAN network.

Baudrate Select network speed.

Parameters Function

Mode Select the type of CAN network.

Use device ID as node ID The device ID of the device is used as the node ID in the CAN net-

work.

Assignment of the device ID: see chapter 2.1.8 Network / Inter-

faces / IOs, page 33

Device ID Enter the node ID of the scanner in the CAN network.

Baudrate Select network speed.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

Sin comentarios

SICK ICR890 Instrucciones de operaciones Pagina 36